High Quality Water Oil Separator in Oily Wastewater Treatment Plant

While Marine Cooking Equipment, Cold RolLED Precision Steel Pipes, Camera Light are upgraded, other products supplied by our factory are also upgraded simultaneously to ensure the quality of use. Our company has been committed to the innovation and practice of green product design for many years. Our company continuously strengthens our independent innovation ability, speeds up personnel training, increases investment, and promotes our development. The company strictly controls product quality in production, and gradually formed a unified and complete production and sales system in terms of after-sales follow-up services.

Use and characteristic:

The oily water is not sucked directly into the special pump of the system to avoid the original oil-water emulsion, to ensure the separation with a high efficiency and to reduce the load of secondary emulsified oil separator, to prolong the life of device accordingly.

When discharged water from first stage separator is over 15ppm, It automatically enter into the second treatment chamber and continue to be treated . Discharging water below 15ppm would be discharged overboard. When the standard of the water from secondary stage are qualified, and after 20 minutes, the device will automatically switch to a working condition I, the process as above. When second stage oil separator treatment function failed and second discharge water is over 15ppm, 15ppm bilge water alarm devices would transmit alarm signal again. the treatment water return to bilge bottom. At this time, the device should be carried out relating to the maintenance or replacement of parts and components, in order to restore function.

When separated dirty oil should be up to the extent of collection on the top of first separator, Oil level detector to transmit signal, the screw pump stop, the water from pressure tank enters into the bottom of the separation device, to be back-flushing reversely through the congregation. Dirty oil on the top to be pressed by the back-flushing water, and discharged into the dirty oil tank.

Main Technical Data for 5 m3/h oily-water Separator:

Capacity: 5 m3/h

Discharge standard: Less than 10(mg/L)

Accessory pump: Single-screw pump

Motor power:2.2 kW

Pump lift height: Equal or less than 6 meters

Power: AC380V,50Hz,3 phase

Oil discharge control model: Auto or manual

Net weight: about 1700kg

We are constantly searching for newer and better methods to continuously improve product quality and service levels. We operate with integrity and are committed to becoming a leader in the High Quality Water Oil Separator in Oily Wastewater Treatment Plant industry. We believe that the sustainable development of the economy and society is the basic guarantee for the sustainable operation of the enterprise. Being guided by customer demands, aiming at improving the efficiency and quality of customer service, we constantly improve products and provide more comprehensive services.