service@bibwin.com    +86-512-66722459
Cont

Have any Questions?

+86-512-66722459

0.25m3/H, 0.5m3/H, 1m3/H, 2m3/H Imo-Mepc107 (49) Approved Cysc107 Series 15ppm Marine Bilge Filtration/Oily Water Treatment Device/Solid and Liquid Separator

0.25m3/H, 0.5m3/H, 1m3/H, 2m3/H Imo-Mepc107 (49) Approved Cysc107 Series 15ppm Marine Bilge Filtration/Oily Water Treatment Device/Solid and Liquid Separator

The plant is applicable to treat bilge oily-water of vessels, it is also applicable to treat oily-water of port, wharf, oil platform and enterprise. The discharge water which treated by the plant completely accord with the correlative stipulate of IMO MEPC.107(49) .
Send Inquiry

Product Introduction

Our Search Light, Marine Door, 1P Simple Folding Boat are made through advanced fully automated production lines and high-end equipment. We insist on realizing our greatest value for creating and building a better future for human beings. We implement the new development concept and strive to promote the high-quality development of our company.

Use and characteristic:

The oily water is not sucked directly into the special pump of the system to avoid the original oil-water emulsion, to ensure the separation with a high efficiency and to reduce the load of secondary emulsified oil separator, to prolong the life of device accordingly.

When discharged water from first stage separator is over 15ppm, It automatically enter into the second treatment chamber and continue to be treated . Discharging water below 15ppm would be discharged overboard. When the standard of the water from secondary stage are qualified, and after 20 minutes, the device will automatically switch to a working condition I, the process as above. When second stage oil separator treatment function failed and second discharge water is over 15ppm, 15ppm bilge water alarm devices would transmit alarm signal again. the treatment water return to bilge bottom. At this time, the device should be carried out relating to the maintenance or replacement of parts and components, in order to restore function.

When separated dirty oil should be up to the extent of collection on the top of first separator, Oil level detector to transmit signal, the screw pump stop, the water from pressure tank enters into the bottom of the separation device, to be back-flushing reversely through the congregation. Dirty oil on the top to be pressed by the back-flushing water, and discharged into the dirty oil tank.


Main Technical Data for 5 m3/h oily-water Separator:

Capacity: 5 m3/h

Discharge standard: Less than 10(mg/L)

Accessory pump: Single-screw pump

Motor power:2.2 kW

Pump lift height: Equal or less than 6 meters

Power: AC380V,50Hz,3 phase

Oil discharge control model: Auto or manual

Net weight: about 1700kg


Over the years, the company has been adhering to the business philosophy of professionalism, focus, and excellence, and has always concentrated all of its strength in the field of 0.25m3/H, 0.5m3/H, 1m3/H, 2m3/H Imo-Mepc107 (49) Approved Cysc107 Series 15ppm Marine Bilge Filtration/Oily Water Treatment Device/Solid and Liquid Separator. We adhere to the corporate spirit of standardization, rigor, innovation and efficiency, actively fulfill our social responsibility, reward our shareholders with good operating efficiency, unite our employees with excellent corporate culture, and meet our customers' needs with innovative products. The beginning of cooperation is the beginning of high quality service!

Hot Tags: 5 oily water separator, China, suppliers, manufacturers, factory, customized, buy, distributor, for sale, made in China, LED Life Jacket Light, Buoy Shackle, Life Buoy, Wire Rope Ferrule, Large Size Throw Over Self Righting Inflatable Liferaft Solas, Shipboard Control Cable

Send Inquiry